Casting has many advantages over spinning. One of its main advantages is that it allows you to cast the lure with great precision. The concern is that using casting rods the problem is that using a spinning rod is not always easy, especially if you are a beginner. Find out how such a rod works and how to use it effectively to get a good result.
What you need to know before using a casting rod
If using a casting rod is not always easy, it is because mastering casting with such a tool requires experience and time. It is useful to practice regularly to be able to use the double crank and to be able to deposit the lure to the centimetre.
In order to master your casting rod, you must first understand how it works, or more precisely, how the various components work, such as the spool and the drag. When casting, it is useful to keep your thumb on the spool. This stops the spool from running after casting and prevents it from racing. If you get wigs during your first attempts, don’t be discouraged as this is normal. In any case, take a boilie hook with you to remove any wigs.
In addition to mastering the reel and the drag, you must also know how to adjust your casting rod for more precision. After that, you proceed to the practical part. You should be able to get between 20 and 30 metres of line out with a single flick of the wrist. Let the reel spin until the lure touches the water. Then slow down using the braking system. Repeat these steps regularly if you want to master casting.
Understanding how a casting rod works
When casting, the spool turns and releases the line. The casting technique consists of managing this rotation to obtain the desired casting distance. This is done by means of a braking system. The latter must be adjusted beforehand according to the characteristics of the lure. The level of tension depends on the size and weight of the lure. Depending on the type of casting rods, the brake adjustment system can be a knob or precision knobs.
For a successful first use, here are some important tips:
- Choose a nylon line body with a large diameter. With it, you won’t risk getting a knot. Even if you do, it will be easier for you to untie it;
- Tighten the friction brake at the beginning. As you get used to the casts, you can loosen it later;
- To begin with, fish for pike before trying other fish, such as perch;
- Finally, don’t be discouraged if the first few attempts seem ineffective. Finally, don’t be discouraged if the first few attempts don’t work. You will get the hang of it once you understand how your casting rod works.
